VALMAR AIRFLO 8600 PULL-TYPE FERTILIZER SPREADER
Delivering Greater Capacity and Flexibility in a Commercial Pull-Type Spreader
Salford’s Valmar 8600 is a high capacity, high speed, air boom applicator capable of delivering up to 1000 lbs/acre at 8 mph.
The highly accurate Venturi metering system is simple to calibrate and easy to operate allowing anyone to take to the field with the 8600.
An optional secondary hopper compartment and secondary metering allows for the application of lower rate herbicides and micronutrients alongside your granular fertilizer.
The 8600 has left / right section control that can be operated manually or automatically with prescription maps when equipped with hydraulic variable rate metering and ISOBUS controller.
FEATURES
COVER MORE ACRES IN LESS TIME
Designed to meet the needs of large-scale farm businesses, the Salford Valmar Airflo 8600 is a high-capacity, pull-type spreader that delivers the highest rates of application currently available in a commercial spreader. Thanks to its advanced design, the Airflo 8600 delivers rates as high as 1,000 pounds per acre at 8 miles per hour, allowing you to finish large jobs faster than ever.
ACCURATE METERING SYSTEM
The Airflo 8600 precise rate is a result of the ground-driven metering system that automatically adjusts on the go to ensure a uniform application rate regardless of ground speed. The hydraulically engaged metering system is based on a 30-setting, oil bath gearbox combined with a two-speed gear ratio to allow 60 settings that can be adjusted in increments of seven percent. This enables operators to select from more settings at closer increments, a feature that translates into more control over application rate for substantial savings in fertilizer costs. The 8600 can also be equipped with a hydraulic drive metering system for those using variable rate technology.
SPREAD MORE PRODUCT BETWEEN FILLS
The 8600’s extra-large, 230-cubic-foot hopper can carry up to seven tons of product. With a capacity like that, you’ll be able to cover more acres between fills. The hopper itself is constructed of corrosion-resistant, painted 409 stainless steel and comes with a roll tarp installed.
IDEAL FOR ROW CROP FARMING
Originally designed to meet the needs of row crop farmers, the 8600 features axles which can be adjusted from 72 inches to 120 inches to accommodate most row spacings. In addition, the 8600 can be equipped with optional tire sizes to achieve greater flotation or narrower tracking, depending on the operation.
HIGH CAPACITY PTO OR HYDRAULIC DRIVEN FAN
This fan has field-proven history on the Air Max. With an operating speed of 4,700 RPM, the fan’s air flow feeds through a nine-inch outlet directly to a two-piece manifold. Important features include a 17-inch fan impeller with plastic impeller blades and a four-band fan belt with tightener. The standard fan drive is a 1,000 RPM, 1 3/8-inch, 21T spline drive shaft. An optional 20T, 1 3/4-inch yoke with bridge is available for those requiring a larger driveline. Valmar also offers an optional hydraulic driven fan drive. This option requires 35 gallons per minute hydraulic flow operating at 2225 PSI – well within the capability of some of today’s higher capacity tractors.
DURABLE AND EASY TO MAINTAIN
The 8600 includes a number of important features that provide for increased durability and easier maintenance. For long life, the hopper and booms are manufactured from stainless steel. There is easy access to all mechanical parts including the manifold. Finally, calibration and emptying of the unit is easier, thanks to funnel trays that are inserted under the metering system for easy collection of material.
CHOOSE BOOM WIDTH TO MATCH YOUR NEEDS
The Valmar 8600 comes with a standard 66-foot boom but can also be equipped with optional boom widths of 60 feet, 54 feet or 57 feet, allowing you to match boom width to your crop requirements. Booms are hydraulically folded and feature a hydraulic shut-off on the right boom to allow application on the left side only. All booms are equipped with rubber torsion boom suspension (which do not require any service and reduce friction, bouncing, and wear) and manual folding, break-away tips to minimize damage that may occur from striking obstacles in the field.
EASY TO OPERATE
Designed for easy use, all important field operations on the Valmar 8600 are hydraulically controlled from the cab through the use of three separate hydraulic lines (four lines with optional hydraulic fan drive). For example, the booms are folded, unfolded and locked hydraulically (through the use of a sequencer valve), allowing quick and easy transition to and from transport position. Also, the metering drive wheel is engaged or disengaged hydraulically and comes equipped with a lockout valve to ensure ongoing positive engagement. Finally, half width application is possible thanks to a hydraulically operated half shut-off clutch system that comes equipped with a pressure relief valve for trouble free operation.
COVER CROPS
Salford’s Valmar air boom applicators gently and accurately handle seed, fertilizer and other granular like herbicides. Equipped with 60 ft booms and drop tube kit, the 8600 delivers granular product on 30 inch centers. Combined with row crop tire options the 8600 has the clearance to direct cover crops between rows of established corn crops.
OPTIONS:
Second Metering System
Apply herbicide, seed, or micro-nutrients at the same time as you apply fertilizer with the addition of this second metering system. By adjusting the built-in hopper panel, you can create two separate hoppers. It comes with its own 60-speed ground driven gearbox (adjusts in five percent increments), two 12-inch, 28-groove (red) rollers, electric control box, and electrically operated clutches which allow in-cab half shut-off of either boom. Its 30-cubic-foot hopper can hold up to 1,450 pounds of product at a density of 45 pounds per cubic foot and comes equipped with convenient hopper bottom slide gates to allow rollers to be easily removed for cleaning or inspection without draining product from hopper.
Note: An optional 12-groove roller is available for the application of coarser materials.
Foam Markers – Simpson SKS foam markers are available.
Hopper Screen Assembly – Keeps out foreign material.
Reviews
There are no reviews yet.