Standard equipment
PerfectCUT cutterbar with cutterbar with quick knife replacement system • SafeGEAR system • Hardened slides • Wearing plates on sliding skids • Hydraulic safety device • Hydraulic cylinder • Central suspension • Support springs • Cutting height adjustment • Swath width regulation • Latch mechanism (for headlands, transport and parking) • Regulated lower hitch pins • Limiting chain • PTO shaft • Additional knives and knife mounting lever • Integrated gearbox (S or SL version) • 2 conditioner operating speed rates 700 and 1000 rpm • Two regulated support legs
Additional equipment
Symbols Explanation:
- Standard equipment
- Optional
- — Option not available
| KT 261 | KT 301 | KT 341 | KT 261 S / SL | KT 261 W | KT 301 S / SL | KT 301 W | ||
|---|---|---|---|---|---|---|---|---|
| Wooden transport crate | ||||||||
| Hydropneumatic suspension system | ||||||||
| Cutting disc with instep | [set] | |||||||
| Topping plates/ Double topping plates | [set] | |||||||
| Rubber swath guide – single | [pcs.] | |||||||
| Rubber swath guide – double | [pcs.] | |||||||
| Rubber swath guide – single (inner) | — | — | — | — | ||||
| Rubber swath guide – single (outer) | — | — | — | — | ||||
| Rubber swath guide – double (inner) | — | — | — | — | — | |||
| Rubber swath guide – double (outer) | — | — | — | — | ||||
| Double rubber swath guide | — | — | — | — | — | — | ||
| Warning plates | [set] | |||||||
Due to its strategy of continuous development, SaMASZ reserves the right to change technical data at any time and without any notice. All operational data and graphical materials found at our website are for reference only. Some of the equipment items are optional and not included in the standard equipment. For more details concerning warranty, safety and products, please contact your local SaMASZ dealer.
Advantages
Clean fodder and turf protection
- stapless regulation of cutting height (from 4,5 cm to 7 cm)
- use of topping plates possible (increases cutting height to 6 cm – 9 cm) or double topping plates (increases cutting height to 8 cm – 12 cm)
- high level of ground following: +/- 24°
- eliminates tedding thanks to application of conditioners – saves time of fodder collection
Customer friendly use
- automatic locking for headlands
- hydraulic lifting to headlands and transport
- mechanical transport locking
- adjustable lower hitch pins for easier attachment with different types of tractors
- KENNFIX hydraulic connector
- stepless adjustment of hydropneumatic relief system from control panel in tractor’s cabin as an option
- three transport position: vertically at tractor’s side, vertically at tractor’s rear, horizontally at tractor’s
rear (only for short distance) - parking in two positions possible
Servicing and spare parts
- low operating costs
- most of maintenance works to be done on user’s own
Proven design
- more than 20 years of experience in manufacturing of disc mowers
- own design of PerfectCUT cutterbar tested on markets across the world
- 2 year warranty
Farmers’ trust
- more than 1 000 KT mowers working on fields across the world
| KT 261 | KT 301 | KT 341 | KT 261 S / SL | KT 261 W | KT 301 S / SL | KT 301 W | ||
|---|---|---|---|---|---|---|---|---|
| Working width | [m / ft] | 2,60 / 8’7” | 3,00 / 9’10” | 3,40 / 11’2” | 2,60 / 8’7” | 2,60 / 8’7” | 3,00 / 9’10” | 3,00 / 9’10” |
| Transport width | [m / ft] | 2,00 / 6’7’’ | 2,00 / 6’7″ | 2,00 / 6’7″ | 2,00 / 6’7’’ | 2,00 / 6’7’’ | 2,00 / 6’7’’ | 2,00 / 6’7’’ |
| Transport height | [m / ft] | 3,10 / 10’2’’ | 3,50 / 11’6″ | 4,20 / 13’8’’ | 3,10 / 10’2’’ | 3,10 / 10’2’’ | 3,50 / 11’6’’ | 3,50 / 11’6’’ |
| Swath width | [m / ft] | 1,50 – 1,90 / 4’11” – 6’4” | 1,90-2,30 / 6’4″-7’7″ | 2,30 – 2,80 / 7’7’’ – 9’2’’ | 1,50 – 1,90/ 4’11’’ – 6’4’’ | 1,00 – 1,30 / 3’4” – 4’4” | 1,90 – 2,30 / 6’4’’ – 7’7’’ | 1,40 – 1,70 / 4’7’ – 5’7’’ |
| Necessary hydraulic couplers | 2 x single action + 1 x double action | 2 x single action + 1 x double action | 2 x single action + 1 x double action | 2 x single action + 1 x double action | 2 x single action + 1 x double action | 2 x single action + 1 x double action | 2 x single action + 1 x double action | |
| Working capacity | [ha/h / ac/h] | ~ 2,80 / ~ 7,00 | ~ 3,50 – ~ 8,70 | ~ 4,00 / ~ 10,00 | ~ 2,80 / ~ 7,00 | ~ 2,80 / ~ 7,00 | ~ 3,50 / ~ 8,70 | ~ 3,50 / ~ 8,70 |
| Number of discs | [pcs.] | 6 | 7 | 8 | 6 | 6 | 7 | 7 |
| Number of knives | [pcs.] | 12 | 14 | 16 | 12 | 12 | 14 | 14 |
| RPM | 540 (1000 – option) | 540 (1000 – option) | 540 (1000 – option) | 1000 | 1000 | 1000 | 1000 | |
| 3-point hitch cat. | II | II | II | II | II | II | II | |
| Power demand | [HP] | from 70 | from 80 | from 90 | from 90 | from 90 | from 100 | from 90 |
| Weight | [kg / lbs] | 1000 / 2205 | 1060 /2335 | 1130 / 2490 | 1300 / 2865 | 1390 / 3065 | 1350 / 2975 | 1490 / 3285 |
| Weight | [kg / lbs] | 955 / 2105 | 1015 /2235 | 1090 / 2405 | 1305 / 1250 1290 / 2845 | 1360 / 3000 | 1420 / 1310 | 1460 / 3220 |
| PTO shaft | tractor – mower: with friction overrunning clutch, built in: no clutch | tractor – mower: with friction overrunning clutch, built in: no clutch | tractor – mower: with friction overrunning clutch, built in: no clutch | tractor – mower: with friction overrunning clutch, built in: no clutch | tractor – mower: with friction overrunning clutch, built in: no clutch | tractor – mower: with friction overrunning clutch, built in: no clutch | tractor – mower: with friction overrunning clutch, built in: no clutch | |
| Single rubber swath guide | [pcs.] | 1 | 2 | 2 | Metal swath guides in conditioner | Metal swath guides in conditioner | Metal swath guides in conditioner | Metal swath guides in conditioner |
Due to its strategy of continuous development, SaMASZ reserves the right to change technical data at any time and without any notice. All operational data and graphical materials found at our website are for reference only. Some of the equipment items are optional and not included in the standard equipment. For more details concerning warranty, safety and products, please contact your local SaMASZ dealer.
Reviews
There are no reviews yet.