Standard equipment
Shaft with double flail spiral (double overlapping) • Hydraulic discharge • Mowing height adjustment • Front protective metal sheet guards (EMU) • Road lights • PTO shaft • Front support wheels set (IBIS) • Automatic tensioning of V-belts
Additional equipment
Symbols Explanation:
- Standard equipment
- Optional
- — Option not available
| IBIS 150 | IBIS 150 Up | ||
|---|---|---|---|
| Front support wheels | |||
| Metal basket | |||
Due to its strategy of continuous development, SaMASZ reserves the right to change technical data at any time and without any notice. All operational data and graphical materials found at our website are for reference only. Some of the equipment items are optional and not included in the standard equipment. For more details concerning warranty, safety and products, please contact your local SaMASZ dealer.
Design
- simultaneous cutting and grass pick-up
- hydraulic discharge
- low weight owing to use of high-quality steel
- front protective rubber guards
- unlike EMU intended for areas of special care
- designed for low power tractors
- container’s discharge possible directly on the trailer (IBIS UP) – up to 2 m / 6’7”
Ground following bar
- automatic cleaning with flails
- stepless working height adjustment (IBIS)
Flail shaft
- equipped with double row barrel bearings
- arrangement of flails provides intensive shredding of material and faster drying and decomposition
- less drives – time savings
- lower load of machine and tractor
| IBIS 150 | IBIS 150 Up | ||
|---|---|---|---|
| Working width | [m / ft] | 1,50 / 5’ | 1,50 / 5’ |
| Necessary hydraulic couplers | 1 x double acting | 2 x double acting | |
| Number of knives | [pcs.] | 50 | 50 |
| Number of counter knives | 1 row | 1 row | |
| RPM | 540 | 540 | |
| Power demand | [HP] | from 35 | from 35 |
| Container’s capacity | [m³ / cu.ft.] | 0,90 / 35 | 0,90 / 35 |
| Discharge height | [m / ft ] | – | 2,00 / 6’7″ |
| Flail shaft diameter | [mm / in] | 108 | – |
| 3-point hitch cat. | I | I | |
| Weight | [kg / lbs] | 385 / 850 | 410 / 903 |
| Max. diameter of branches to be cut | [mm / in] | 35 / 1 3/8” | 35 / 1 3/8” |
| PTO shaft | tractor – mower: with overrunning clutch | tractor – mower: with overrunning clutch | |
| Flail shaft diameter | [mm / ft] | – | 168 |
Due to its strategy of continuous development, SaMASZ reserves the right to change technical data at any time and without any notice. All operational data and graphical materials found at our website are for reference only. Some of the equipment items are optional and not included in the standard equipment. For more details concerning warranty, safety and products, please contact your local SaMASZ dealer.
Reviews
There are no reviews yet.