INDEPENDENT 4100 (HD EXTREME)
HYBRID VERTICAL TILLAGE
The I-4100 is the most aggressive machine in the Salford Independent Series. This machine combines two rows of shallow concave disc blades followed by two rows of coulters on the same frame. Blades are spaced seven-and-a-half inches apart. The front two rows of concave blades are spaced 15 inches apart, and the coulters split that spacing to reduce density between the disc blades. The I-4100 performs best as a fall residue management machine and for incorporating heavy product. The additional tillage action of the disc blades mixes more soil with residue to further accelerate decomposition. For seedbed preparation, the I-4100 does its best work with two passes at slightly opposite angles to ensure the surface is fully prepared. The Independent Series tools comfortably apply ammonia at eight miles per hour, often with the anhydrous meter being the limiting factor.
Finishing Package
Finishing Package Consist of:
Heavy Duty 3 bar 1/2” tines
-
1/2” dia. tine, strength for exceptional leveling
-
3 ranks with 20” clearance
-
No tool pitch adjustment
Heavy Duty 14” Rolling Harrow
-
Adjustable down pressure
-
Triple seal 1.5” bearing resists rock damage, even at high speed
-
Flex Finish Hydraulically Adjustable Rolling Harrow (Optional 28′ and up only)
STANDARD FEATURES
Coulters and Mounts
-
Front: 22” dia a 5 mm shallow concave discs (rubber mount)
-
Rear: 22” dia x 5mm 8 wave coulter (coil mount)
-
Boron steel blades
-
5” of vertical travel
Frame
-
Heavy Duty 4”x 6” tubing
-
Hydraulic level lift
-
Hydraulic single-point depth control
-
Heat treated cast clevis hitch
-
Operator convenience center
-
Welded main frame with capped tube ends
Tires—Mainframe
-
20’ – 24’ 8 bolt 12.5L x 15 “F”
-
28’ – 36’ 8 bolt 305/70 x R22.5
-
41’ (3 Section) 8 bolt 305/70 x R22.5 Recapped Truck Tire
-
41’ (5 Section) 8 bolt 425/65R x 22.5 Recapped Truck Tire
-
50’ (5 Section) 10 bolt 425-65R x 22.5 Recapped Truck Tire
-
60’ (5 Section) 10 bolt 445-65R x 22.5 Recapped Truck Tire·
Tires—Wings
-
20’ – 41’ All Wings
-
11L x 15 6 bolt load range “D”
-
50’, 60’ – All Wings
-
8 bolt 12.5L x 15 “F”
-
100-lb. weight kits
-
Adjustable tow hitch (one-man connection)
-
Hydraulic lines and quick coupler to tow hitch
-
Roller dirt shield
SPECIFICATIONS
| I-4100 Specs | |
|---|---|
| Operating Depth Range | 0″ – 5″ (0 m – .13 m) |
| Blade Mount | Leaf spring & rubber suspension |
| Blade Type | 22″ (.56 m) x 5mm First two rows: Shallow Concave Last two rows: Coulter – 8 wave (2 1/2″(.06 m) deep wave) or – 13 wave (1 3/4″ (.04 m) deep wave) |
| Blade Spacing | 7.5″ (.19 m) |
| Vertical Travel | 5″ (.13 m) |
| Swivel | No |
| Hub | 5 bolt |
| I-4100 Independent Series | ||||||
|---|---|---|---|---|---|---|
| Size | Frame Sections | # of Concave/ Coulter |
Transport Height | Transport Width | Approx. weight with harrows |
H.P. Required* |
| 12′ (3.66 m) | 1 | 9/10 | No wings | 13’3″ (4.04 m) | 8,100 lbs (3.67 t) |
140-160 |
| 16′ (4.88 m) | 3 Flat-Fold | 11/14 | 10′ (3.05 m) | 10′ (3.05 m) | 12,200 lbs (5.53 t) |
180-210 |
| 20′ (6.10 m) | 3 | 15/18 | 11’2″ (3.40 m) | 13’10” (4.22 m) | 14,700 lbs (6.67 t) |
220-260 |
| 24′ (7.32 m) | 3 | 17/20 | 12’8″ (3.86 m) | 13’10” (4.22 m) | 16,300 lbs (7.39 t) |
270-320 |
| 28′ (8.53 m) | 3 | 21/24 | 13′ (3.96 m) | 15’8″ (4.78 m) | 19,900 lbs (9.03 t) |
310-370 |
| 31′ (9.45 m) | 3 | 23/26 | 14’6″ (4.42 m) | 15’8″ (4.78 m) | 20,800 lbs (9.44 t) |
350-410 |
| 36′ (10.97 m) | 3 | 27/30 | 14’2″ (4.32 m) | 21′ (6.40 m) | 24,900 lbs (11.30 t) |
400-470 |
| 41′(12.50 m) | 3 | 31/34 | 16’6″ (5.03 m) | 21′ (6.40 m) | 27,100 lbs (12.29 t) |
460-540 |
| 41′ (12.50 m) | 5 Bi-fold | 31/34 | 13’6″ (4.12 m) | 18’9″ (5.72 m) | 32,300 lbs (14.65 t) |
460-540 |
| 50′ (15.24 m) | 5 Bi-fold | 39/40 | 14’3″ (4.34 m) | 19′ (5.79 m) | 37,800 lbs (17.15 t) |
500+ |
| 60′ (18.29 m) | 5 Bi-fold | 47/50 | 15’8″ (4.78 m) | 21’10” (6.66 m) | 44,600 lbs (20.23 t) |
500+ |
| *Horsepower requirements vary by speed and operating depth. | ||||||
| Operating Guide | ||
|---|---|---|
| Operation | Crop Type | Depth |
| Seed bed preparation* | All crops | 2″ – 3″ (.05 m – .08 m) |
| *For seedbed preparation with the I-4100, run two passes at slightly opposite angles. The machine should be tipped 1″ to 1.5″ (.03 m -.04 m) to the near so that the coulters penetrate deeper than the concave blades. Not recommended for seedbed preparation in heavy clay soils. | ||
| Fall residue management | All Crops | 3″ (.08m) or deeper (coulter hubs must stay clear of field surface) |
Reviews
There are no reviews yet.