Standard equipment
Hydraulic safety breakaway device (KWT and CAMEL) • Mechanical safety breakaway device (KOLIBER) • Cable-type control panel • Temperature and oil level indicators • Hydraulic lock • Cooler with oil filters • Adjustable support legs • Warning plates • Rear road ligts • PTO shaft • Stabilizing brackets (KWT, CAMEL)
Additional equipment
Symbols Explanation:
- Standard equipment
- Optional
- — Option not available
CAMEL 900 | ||
---|---|---|
PTO speed 1000 rpm |
Due to its strategy of continuous development, SaMASZ reserves the right to change technical data at any time and without any notice. All operational data and graphical materials found at our website are for reference only. Some of the equipment items are optional and not included in the standard equipment. For more details concerning warranty, safety and products, please contact your local SaMASZ dealer.
Design
- arm mounted to tractor’s rear 3-point linkage
- additional stabilizing brackets (KWT, CAMEL)
- high suspended original arm enables safe drive over obstacles
- opened cover on hydraulic and electrical units
Hydraulic unit
- independent, equipped with own cooler and pump
- oil tank with level indicator and temperature sensor
- arm equipped with hydraulic connectors
- hydraulic pump with capacity up to 100 l/min (26 GPM)
- available in option for 1000 rpm
Steering
- cable-type as standard
- valves controlled with Bowden cables
- electric (E) ON-OFF in option:
- arm is moved at constant speed adjusted with choke valves
- proportional steering (EP) available in option:
- arm motion speed dependent on joystick position
- simultaneous three cylinder control possible
Video
CAMEL 900 | ||
---|---|---|
Arm reach | [m / ft] | 9,00 / 29’7” |
Necessary hydraulic couplers | 1 x double acting | |
Recommended tractor’s weight | [kg / lbs] | 7500 / 16535 |
Oil tank capacity | [L / cu.ft.] | 200 / 52 us gal |
Pump power | [kW] | 33 |
Pump efficiency | [l / min / GPM] | 90 / 23 |
Transport width | [m / ft] | 190 / 6’3” |
Transport height | [m / ft] | 400 / 13’1” |
RPM | 540 | |
Power demand | [HP] | from 100 |
3-point hitch cat. | III | |
Weight | [kg / lbs] | 1370 / 3020 |
PTO shaft | tractor – mower: no clutch | |
Stabilization of three-point linkage | Turnbuckle |
Due to its strategy of continuous development, SaMASZ reserves the right to change technical data at any time and without any notice. All operational data and graphical materials found at our website are for reference only. Some of the equipment items are optional and not included in the standard equipment. For more details concerning warranty, safety and products, please contact your local SaMASZ dealer.
Reviews
There are no reviews yet.