Penta Stationary Vertical Mixers are compact and convenient machines with a high capacity and low power consumption. Stationary Mixers offer the possibility to use more economical feed boxes with less horsepower to distribute the feed. The mixers run at a reduced constant RPM as opposed to mobile mixers, and full clean out can be arranged through a variable drive and gearbox. All mixers are built on a subframe and supports can be ordered to put the machine at the desired height. The machine is operated by a frequency changer which makes sure that the machine starts slowly and without any increase in power. The frequency changer also enables acceleration as required. Contact Penta for door location and HP requirements.
2030 SPECIFICATIONS
FEATURES
ELECTRONIC CONTROLS
The mixers are able to run at a reduced constant RPM using electronic controls.
- Variable Speed Drive
- Speed up
- Reverse
- Slow down
- Remote Door Controls
DRIVELINE
To transfer electronic power to the mixer there are a variety of ways to use a single motor or motors together.
Drives offered:
- Belt Drives
- Direct Drives
- PTO Drive
- 2 Speed Gear Box
DOORS
There are two door options available for the stationary mixer. Each stationary mixer can be customized and multiple door options are available on a single unit.
Placement options:
- End Doors
- Corner Doors
CONVEYOR
Conveyors for the stationary mixer come in 3 size options and are built for long life and dependability using the heaviest cast chain in the industry.
- Available sizes: Bases 4′-4.5′-5′-6′, Wing 9′-10′
- Option to upgrade to stainless rails available
- Powered by Electronic 3 HP Motor
Specifications | Imperial | Metric |
---|---|---|
Capacity 9″ Rubber | 244 cu ft | 7 m3 |
Total Width | 81.25 in | 206.38 cm |
Total Length | 140 in | 355.6 cm |
Total Height | 90.75 in | 230.51 cm |
Loading Height | 88 in | 223.52 cm |
Chute Height | 17 in | 43.18 cm |
Model Description | |
---|---|
Auger Thickness (Optional 3/4″) | 1/2″ |
Floor Thickness | 3/4″ |
2-Speed Gearbox | Standard |
Max lbs of Feed in Mixer | 4,390 lbs |
Magnets | Optional |
Hydraulic Power Pack | Yes |
Drive Systems and Electrical Requirements | |
---|---|
Drive Style | Electrical Serice Required |
Belts, 2x10hp | 240V single phase, 100A |
Reviews
There are no reviews yet.